The CO2TEK CO2 Regulator and valve features an accurate, easy to adjust CO2 flow meter that supports from 0.5 to 15 cubic feet per hour, a pre-set regulator that never needs adjusting, and an electronic solenoid valve. Each regulator also comes with a tank pressure gauge, an easy to read flow meter, and a 6′ foot power cord. This regulator also works with any 120V device for easy installation. Once installed. simply add the tubing needed to disperse the CO2 evenly throughout your room by attaching the tubing to the back of an oscillating fan for even dispersion. If you are using this without a digital CO2 controller, you will need to use a timer. This regulator is backed by a 3-year full exchange warranty as well.

The Garden Controls CO₂ Controller will control any CO₂ generator or regulator to maintain the grow room CO₂ level around set point value.

Listed Included Modules and Accessories: One plug-in type module. One user guide. One screw kit

Included Modules and Accessories: One main controller box. Three lint filters to protect Co2 Sensor.One user guide. One screw kit

IGS-061 CO2 CONTROLLER

IGS-100 CO2 SMART CONTROLLER

Listed Included Modules and Accessories: One plug-in type module. One user guide. One screw kit.

IGS-220 CO2/RH OR TEMP SMART CONTROLLER

Controls the CO2 levels in two zones (or two rooms) simultaneously.

5,000 BTU/HR CO2 Generator (Propane) 5 Burners The LP5 generator is a 15,000 BTU/hour propane burner activated via a 120Vac power cord.

Two output boxes to connect 120Vac equipment. One wall mount power supply. Two computer cables to connect remote module. Two telephone cables to connect Output Boxes. One user guide. One screw kit

30,000 BTU/Hr CO2 Generator (Propane) 10 Burners The LP10 generator is a 30 000 BTU/hour propane burner activated via a 120Vac power cord.

IGS-221 CO2/RH/TEMP CONTROLLER