Honeywell ST9120U1011 Universal Electronic Fan Timer
Twinning capability, with 5 amp. Fuse • Application: Integrates control of combustion blower and circulating fan operations for a gas warm air appliance • Electrical Ratings: 18 to 30 Vac • Frequency: 60 Hz • Heat Fan On Delay: adj. set at 30 sec • Heat Fan Off Delayz: adj. set at 140 sec • Cool Fan On Delay: adj. 4-30 sec, (set at 4 sec) • Cool Fan Off Delay: fixed 30 sec • Temperature Range, Ambient (F): -40 F to +175 F • Temperature Range, Ambient (C): -40 C to +79 C
SV9502H2522 HONEYWELL SMARTVALVE GAS VALVE
The SmartValve System Controls provide easy field replacement of a wide range of SV9500, SV9501, SV9502 and SV9602 SmartValve System models. Gas appliance manufacturers use these models in many types of gas fired heating appliances including central furnaces, residential boilers, rooftop furnaces, commercial cooking appliances, and unit heaters. These controls provide intermittent pilot gas ignition sequencing, pilot flame sensing, and both pilot and main gas control functions in a single control. They are directly compatible with the Q3450 or Q3480 Intermittent Pilot burners used with the original controls on the appliance.
Upgraded Replacement for Honeywell Furnace Smart Gas Valve 1170430
Replacement for Honeywell SV9501M2528 for a lower cost.
Included in package is SV9501M2056 valve 1/2" in and out, 393691 Natural to LP conversion kit and wire harness
This is suitable for application in a wide range of gas fired appliances.
Including furnaces, boilers, unit heaters, infrared heaters, space heaters, water heaters,
decorative appliances and commercial cooking units
3/4" NPT Intermittent Hot Surface Pilot Ignition SmartValve
3/4 in. NPT x 3/4 in. NPT Intermittent Hot Surface Pilot Ignition SmartValve Control with standard opening and 3.5 in. wc pressure regulator setting
•These controls communicate directly with an electronic fan timer (ST9160 Electronic Fan Timer for single stage applications; ST9162 Electronic Fan Timer for two-stage applications) in typical forced warm air furnace applications.
•They also interface with the 208907 Terminal Board, providing compatibility with power stealing thermostats. Or, they directly interface with the appropriate power supplies and a system thermostat for additional appliance applications.
•When controlled directly by a thermostat, these controls do not provide a postpurge function, because power to the control is removed when the thermostat call for heat ends.
•The SV9541 and SV9641 Systems are suitable for a wide range of fan-assisted combustion gas-fired appliances including furnaces, rooftop furnaces, boilers, unit heaters, infrared heaters, water heaters and commercial cooking appliances.