Yellow Jacket 19144 1/4" Male flare. Add-a-hose couplers easily connect
hoses to the length desired. The Yellow Jacket 19144 is Made in the USA.

Yellow Jacket 41048 Handle screws (2) - TITAN, (6 sets) for TITAN manifolds.
Made in the USA.

Yellow Jacket 41142 Handle screws (2) - Series 41/TITAN (6 sets) for Series 41 and TITAN manifolds.
Made in the USA.

Fits the Yellow Jacket 60139 Cutter

Replacement Handle Grip for the Yellow Jacket 60278

Yellow Jacket 18995 "O" ring set. For 1/4" vacuum/charge valve with or without side port.

• Fits the Yellow Jacket 77940
• Made in the USA

Filler Caps Liquid Gauges

Yellow Jacket 61152 Finfix 2 (9 & 15 Fins Per Inch), Yellow

Yellow Jacket 61153 Finfix 3 (11 & 13 Fins Per Inch), Blue

Yellow Jacket 61156 Finfix 6 (18 & 20 Fins Per Inch), Red

Yellow Jacket 41063 Filter - a replacement part for TITAN manifolds.

Fits Yellow Jacket 60101, 60102, 60103 Cutters

Bantam Retaining Nut

Fits the Yellow Jacket 60142 Cutter

Yellow Jacket 41047 Gaskets (2) - a replacement part for TITAN manifolds.
Made in the USA.

Handle and Screw for Series 41 Manifold.
Made in the USA.

Yellow Jacket 40271 1/4" MFL x 1/8" NPT Male fitting replacement parts for BRUTE II and TITAN manifolds.
Made in the USA.

Yellow Jacket 41122 Replacement filter screen (5 pak). Manifold particulate filters trap particles before they damage valve seats or pass into recovery equipment. Screens are replaceable and cleanable. The Yellow Jacket 41122 is Made in the USA.
Made in the USA.

• 5/64" Hex Key head
• Heat treated for long life
• Chamfered ends for easy insertion into sockets
• Black finish
• Made in the USA

Feed screw for manifolds.
Made in the USA.

Yellow Jacket 19143 3/16" Male flare. Add-a-hose couplers easily connecthoses to the length desired. The Yellow Jacket 19143 is made in the USA

• 3/32" Hex Key head
• Heat treated for long life
• Chamfered ends for easy insertion into sockets
• Black finish
• Made in the USA

Bends soft copper and aluminum tubing

Bends soft copper and aluminum tubing

• 1/8" Hex Key head
• Heat treated for long life
• Chamfered ends for easy insertion into sockets
• Black finish
• Made in the USA

Yellow Jacket 16801 1/4" M. Fl. X 1/4" Npt M. Str., Steel Half Union Ammonia Fittings

Yellow Jacket 78912 12", 3/8" Str. X Str., High Temp. Pressure Control Hose.

• The higher temperature ratings up to 266F eliminate the failures caused by maximum loads on rubber hoses
• Polyester braid reinforcement with high tensile strength and high modulus withstand higher pressures
• Hex nuts are steel and finished with black zinc. Copper gaskets provide the best possible seal
• Yellow color makes hose easily visible inside system
• 4000 psi (276 bar) minimum burst, 800 psi (55 bar) maximum working pressure
• Hex style fittings with 1/4" SAE thread. Straight or 90 with copper gaskets
• Operating temperature -49 to 266F (-44 to 130C)
• Minimum bend radius: 4" (102mm)

• Fits Yellow Jacket 74762 Cutters
• Made in the USA

• Fits Yellow Jacket 77511 for Imperial 206-Fa Cutters
• Made in the USA