Light Sensor: Day/night detector.

Output On: Light indicator is lit when power is applied to the power/output cord (piggy back cord).

External Temperature Probe for accurate reading.

Grozone Garden Controls Cooling Thermostat Specifications:

Load: Max 12 Amps.

120V equipment is plugged into the 5-ft power/output cord (piggyback cord).

The unit can function day and night or during day time only. Included with CY1: •One plug-in type module •One user guide •One screw kit

The unit can function day and night or during day time only. Included with the Grozone CY2: •One plug-in type module •One user guide •One screw kit

One plug-in type module. •One user guide. •One screw kit

Can power 120Vac equipment up to 15 amp Included with the Grozone TP2: •One plug-in type module •One user guide

Temperature shut off thermostat.

The Grozone TP 24 Hour Timer with High Temp Shut Off is the answer for ultimate dependability in managing your indoor garden temperature.

Two output boxes to connect 120Vac equipment. One wall mount power supply. Two computer cables to connect remote module. Two telephone cables to connect Output Boxes. One user guide. One screw kit

Included Modules and Accessories: One main controller box. Three lint filters to protect Co2 Sensor.One user guide. One screw kit

Listed Included Modules and Accessories: One plug-in type module. One user guide. One screw kit.

It is perfect to switch 240V of any equipment!

Grozone SFF4 : SMART FLIP FLOP LIGHT SWITCHER is designed to operate high intensity discharge (HID) lighting systems.

Controls the CO2 levels in two zones (or two rooms) simultaneously.

5,000 BTU/HR CO2 Generator (Propane) 5 Burners The LP5 generator is a 15,000 BTU/hour propane burner activated via a 120Vac power cord.

30,000 BTU/Hr CO2 Generator (Propane) 10 Burners The LP10 generator is a 30 000 BTU/hour propane burner activated via a 120Vac power cord.

IGS-061 CO2 CONTROLLER

IGS-021 DAY/NIGHT TEMP CONTROLLER

IGS-220 CO2/RH OR TEMP SMART CONTROLLER

IGS-221 CO2/RH/TEMP CONTROLLER

IGS-100 CO2 SMART CONTROLLER

The CO2TEK CO2 Regulator and valve features an accurate, easy to adjust CO2 flow meter that supports from 0.5 to 15 cubic feet per hour, a pre-set regulator that never needs adjusting, and an electronic solenoid valve. Each regulator also comes with a tank pressure gauge, an easy to read flow meter, and a 6′ foot power cord. This regulator also works with any 120V device for easy installation. Once installed. simply add the tubing needed to disperse the CO2 evenly throughout your room by attaching the tubing to the back of an oscillating fan for even dispersion. If you are using this without a digital CO2 controller, you will need to use a timer. This regulator is backed by a 3-year full exchange warranty as well.

GROZONE OB1 OUTPUT BOX FOR CO2 CONTROLLER

GROZONE OB2 OUTPUT BOX FOR SCC1 CONTROLLER

One computer cable to connect remote module, Two telephone cables to connect Output Boxes, One user guide, One screw kit

One plug-in type module, One Sensor, One 25-ft cable, One user guide, One screw kit

One main controller box with one power cord •Three lint filters to protect Co2 Sensor •One user guide •One screw kit

IGS-111 RH-TEMP SMART CONTROL - 2 BOX SET.

Listed Included Modules and Accessories: One plug-in type module. One user guide. One screw kit

The Garden Controls CO₂ Controller will control any CO₂ generator or regulator to maintain the grow room CO₂ level around set point value.